First-Time Operation - Panasonic CF-VEK201-Serie Bedienungsanleitung

First-time Operation

1
3
E
4
5
7
6
Attach the main unit according to the following procedure.
NOTE
Make sure no foreign objects are on the Keyboard Base Unit.
1 Align the main unit with the indicated circled parts of the
Keyboard Base Unit, and insert it.
2 Pull out the handle.
● If you do not pull out the handle before opening the display,
the computer may fall over due to the weight of the display.
2
3 Hold the corners with both hands, and lift the display slightly.
4 Hold the side of the computer with either of your hands and then
lift up the display to open.
CAUTION
Do not open the display wider than necessary (180° or more), and
do not apply excessive pressure to the LCD. Do not open or close
the computer holding the edge of the LCD segment.
5 Push the main unit at the locations dashed line circled in the
illustration in a downward direction.
6 Confirm that the release lever (B) returns in the direction of the
arrow.
 R aise detach the lock (A) above.
NOTE
Confirm that the red signs near the detach lock and the release
lever can not be seen.
For detailed descriptions, see Operating Instructions (Read Me
First/Basic Guide/Reference Manual).
6
RELEASE
A B