Bluetooth Mode; Wired Mode - T'nB HPXPL2BK Anleitung

EN

BLUETOOTH MODE

Note: This speaker is waterproof to IPX7 standard, which means that it can wit-
hstand immersion in water up to a depth 1 m for a maximum of 30 min. Make sure
that the silicone cover protecting the JACK and USB inputs is hermetically sealed
when the speaker is in contact with water. Any misuse or failure to comply with
these conditions may result in a risk of damage to the product.
PAIRING:
Step 1: Press and hold the «O» button for 3 seconds to turn on the speaker. The
speaker will automatically enter Bluetooth mode and will be ready to be connec-
ted to a device.
Step 2: Open the Bluetooth menu of your smartphone or computer and select TNB
XPLORE from the list of Bluetooth devices.
Step 3: The speaker will beep and the blue LED will stay on continuously, which
means that the pairing was successful. If unsuccessful, turn off the speaker by
pressing and holding «O» and repeat the pairing process from the beginning.
FUNCTIONS:
O 1. Press briefly while playing your music to Play/Pause
2. When receiving a call, press briefly to answer, or press twice to reject the call.
+ 1. Press briefly to increase the volume
2. Press and hold to go to the next track
– 1. Press briefly to decrease the volume
2. Press and hold to return to the previous track

WIRED MODE:

The speaker also has an audio jack port. Just connect the speaker to your mobile
phone/MP3 player/PC/laptop with the 3.5 mm audio jack cable. The green LED will
light up and you can play music via a wired connection.
FUNCTIONS:
O ¬ Press briefly while playing music to Play/Pause
+ ¬ Press briefly to increase the volume
– ¬ Press briefly to decrease the volume
OTICE_HPXPL2BK.indd 4 17/08/2018 16:0