Filtering Mode - THOMSON DST61XD Montage- Und Gebrauchsanweisung

EN
2 / INSTALLING YOUR APPLIANCE

Filtering mode

•
- Using the supplied screws and screw anchors,
fix the upper flue bearing bracket to the ceiling and/
or wall, checking that it is aligned with the hood
(Fig.5).
- Fix the air baffle (Fig. 10R) to the upper decorative
flue by means of the proper screws.
- Fit the adapter flange (F) on to the air baffle
(Fig.10)
- Connect a flexible pipe that fits the air baffle
(Fig.10T) locking it with a metal hose clamp (pipe
and clamps are not provided).
- Plug in the hood.
- Draw the set of the flues near the upper part of
fig. 10
the hood and fix the pipe to the flange.
- Fix the decorative flue to the bracket by the
screws provided (Fig. 8A).
- Fix bottom side of the decorative flue to the hood
by the screws provided. Screws must be worked
from the inside of appliance (Fig. 9A).
26