Menu Navigation - Motorola APX 7000 Kurzanleitung

APX7000_DualQRG.book Page 4 Monday, October 28, 2013 10:24 AM
Sending an Emergency Call
1
Press the Emergency button.
2
Press and hold the PTT button. Speak clearly
into the microphone.
3
Release the PTT button to end call.
4
Press and hold Emergency button to exit
emergency.
To exit emergency at any time, press and hold
the Emergency button.
Sending a Silent Emergency Call
1
Press the Emergency button.
2
The display does not change; the LED does
not light up, and there is no tone.
3
Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
To exit emergency at any time, press and hold
the Emergency button.
Display Status Icons
u
Receiving a call or data.
t
Transmitting a call or data.
English
Downloaded from www.Manualslib.com
8
Blinks when the battery is low.
The more stripes, the stronger the
v
signal strength for the current site
(trunking only).
Direct radio to radio communication or
O
connected through a repeater.
On = Direct
Off = Repeater
M
This channel is being monitored.
H .
L = Radio is set at Low power.
OR
H = Radio is set at High power.
i
Scanning a scan list.
Blinking dot = Detects activity on the
j
Steady dot = Detects activity on the
k
The vote scan feature is enabled.
{ |
,
manuals search engine
Priority-One Channel
during scan.
Priority-Two Channel
during scan.

Menu Navigation

< or > to Menu Entry.
}
, or directly below Menu
Entry to select.
H to exit.
On = Secure operation.
m
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On steady = View mode
Blinking = Program mode
On = AES Secure operation.
l
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
G
On = feature enabled, and signal
available.
Off = feature disabled.
Blinking = feature enabled, but signal
unavailable.
n
On = User is currently associated with
the radio.
Off = User is currently not associated
with the radio.
Blinking = Device registration or user
registration with the server failed due
to an invalid username or pin.
o
Data activity is present.
b
Bluetooth is ready.
a
Bluetooth is connected to the device.
U or D to scroll through sub-list.
{ | }
, , or directly below Menu
Entry to select.