Herunterladen Diese Seite drucken

Axis Q1941-E Installationsanleitung Seite 19

Wärmebild netzwerk kamera
Vorschau ausblenden Andere Handbücher für Q1941-E:

Werbung

English
Safety information
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious injuryn
WARNING
Indicates a hazardous situation which, if not avoided, could
result in death or serious injuryn
CAUTION
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injuryn
NO TICE
NO
NO
TICE
TICE
Indicates a situation which, if not avoided, could result in
damage to propertyn
Other message levels
Important
Indicates significant information which is essential for the
product to function correctlyn
Note
Indicates useful information which helps in getting the
most out of the productn
Safety instructions
NO TICE
NO
NO
TICE
TICE
The Axis product shall be used in compliance with local
laws and regulationsn
Store the Axis product in a dry and ventilated
environmentn
Avoid exposing the Axis product to shocks or heavy
pressuren
Avoid exposing the Axis product to vibrationn
Do not install the product on unstable poles, brackets,
surfaces or wallsn
Do not install the product on vibrating poles, brackets,
surfaces or wallsn
Use only applicable tools when installing the Axis
productn Using excessive force with power tools could
cause damage to the productn
Do not use chemicals, caustic agents, or aerosol cleanersn
Use a clean cloth dampened with pure water for
cleaningn
Use only accessories that comply with the technical
specification of your productn These can be provided by
Axis or a third partyn Axis recommends using Axis power
source equipment compatible with your productn
Use only spare parts provided by or recommended by
Axisn
Do not attempt to repair the product yourselfn Contact
Axis support or your Axis reseller for service mattersn
The power supply shall be plugged in to a socket outlet
installed near the product and shall be easily accessiblen
Use a limited power source (LPS) with either a rated
output power limited to ≤100 W or a rated output
current limited to ≤5 An
Transportation
NO
NO TICE
NO
TICE
TICE
When transporting the Axis product, use the original
packaging or equivalent to prevent damage to the
productn
Battery
The Axis product uses a 3n0 V BR2032 lithium battery as the
power supply for its internal real-time clock (RTC)n Under
normal conditions this battery will last for a minimum of
five yearsn
Low battery power affects the operation of the RTC, causing
it to reset at every power-upn When the battery needs
replacing, a log message will appear in the product's server
reportn For more information about the server report, see
the product´s web page or contact Axis supportn
Lithium coin cell 3n0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl
ether (EGDME), CAS non 110-71-4n
WARNING
Risk of explosion if the battery is incorrectly replacedn
The battery should be replaced with an identical battery
onlyn
Used batteries should be disposed of according to local
regulations or the battery manufacturer's instructionsn
Crançais
Informations sur la sécurité
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures gravesn
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner le décès ou des blessures gravesn
ATTENTION
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner des blessures légères ou modéréesn
A A A VIS
VIS
VIS
Indique une situation qui, si elle n'est pas évitée, pourrait
endommager l'appareiln
Autres niveaux de message
Important
Indique les informations importantes, nécessaires pour
assurer le bon fonctionnement de l'appareiln
Note
Indique les informations utiles qui permettront d'obtenir le
fonctionnement optimal de l'appareiln
Consignes de sécurité
A A A VIS
VIS
VIS
Le produit Axis doit être utilisé conformément aux lois
et règlements locauxn
Conserver ce produit Axis dans un environnement sec
et ventilén
Ne pas exposer ce produit Axis aux chocs ou aux fortes
pressionsn
Ne pas exposer ce produit Axis aux vibrationsn

Werbung

loading

Diese Anleitung auch für:

Q1942-e