End Of Product Life; Troubleshooting - Sunoptic Technologies LLS-2000 Gebrauchsanleitung

8.2 LIMITED WARRANTY
Your LED light source carries a 3-year warranty from the date of shipment on workmanship
and all defects of material, excluding replaceable sweatbands, headband, fiberoptic cable
and lamps. Should your product prove to have such defects within 3- years of the shipment.
Sunoptic Technologies
charge. Should your LED Light Source product(s) need servicing under this warranty,
please contact, Sunoptic Technologies
carefully pack unit in a sturdy carton and ship it to the factory. Please include a note
describing the defects, your name, telephone number and a return address. Warranty does
not cover equipment subject to misuse, accidental damage, normal wear and tear or if
transferred to a new owner without authorization from, Sunoptic Technologies
warranty gives you specific legal rights and you may also have other rights that vary from
state to state.
POST WARRANTY REPAIRS: You may return your product(s) for repair, shipping prepaid to
the factory. Your product will be inspected and an estimate of repair charges will be submitted
to you for approval. Payment must be received before repairs are completed.
9.

END OF PRODUCT LIFE

In accordance with the European Waste from Electrical and Electronic Equipment (WEEE)
directive, we encourage our customers to recycle this product whenever possible. Disposal
of this unit must be performed in accordance with the applicable local environmental
regulations.
In the US a list of recyclers in your area can be found at: http:/www.eiae.org/.
Please contact customer service to issue a return authorization to return product to
manufacturer at the end of product life.
10.

TROUBLESHOOTING

Problem
The power indicator (refer to
4.1) is not lit.
The power indicator is lit, but
lamp will not ignite.
LIT168 SUNOPTIC TECHNOLOGIES
(English)
Downloaded from www.Manualslib.com
®
will repair or replace the product or component part without
• In the US:
• FAX number:
• Customer Service
manuals search engine
® return authorization documentation. You should
877-677-2832 (toll free)
904 733-4832
904-737-7611
Solution
A. Check that the AC power cord is properly
connected.
B. Check the unit fuses. If necessary, replace.
Turn intensity control knob clockwise to increase light
output intensity
®
Date of Revision:06/29/17
®
This
Rev. B
Page 11 of 60