Troubleshooting; Authorized Representative - Sunoptics Surgical Titan 300 Bedienungsanleitung

11.

TROUBLESHOOTING

Problem
The power indicator
(refer to 4.1) is not lit.
The power indicator is
lit, but Xenon lamp will
not ignite.

12. AUTHORIZED REPRESENTATIVE

RMS UK, Ltd.
28 Trinity Road
Nailsea, Somerset BS 484NU
United Kingdom
TEL: 01275 858891
LIT125Sunoptics Surgical
(English)
Downloaded from www.Manualslib.com
®
manuals search engine
Solution
A. Check that the AC power cord is properly
connected.
B. Check the circuit breakers. If necessary,
reset.
C. Power input switch is in the off position
A. Check to make sure lamp cartridge is seated
properly.
B. Check that the lamp door is secured.
C. Check hour meter; if lamp hours exceed the rated
lamp life, replace the lamp (refer to 9.1).
Rev. D
Page 12 of 60