Herunterladen Inhalt Inhalt Diese Seite drucken

Abrasive Blasting Operations - Contracor DBS-25RC Bedienungsanleitung

Sandstrahlmaschinen
Vorschau ausblenden Andere Handbücher für DBS-25RC:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. Abrasive blasting operations.

4.1. Start up.
1.
Check all connections from compressor to the nozzle to ensure that they are properly
Àxed (badly Àxed air hose of the compressor cause a serious damage).
2.
Ensure that abrasive blasting machine is Àlled with abrasive.
3.
Ensure that the necessary safety measures for you and others are observed:
— protective equipment is used,
— puriÀed air is fed to the helmet.
4.
Always check position of RC handle lever, which should be in the safety position with
the holder in vertical position
5.
Feed compressed air to the machine intake.
ATTENTION!
MACHINE MAXIMUM OPERATING PRESSURE — 10 bar.
6.
Close both ball valves at the RC valve.
7.
Ensure that there is no leak in the system. Air should come ONLY out of the vent
under the RC handle lever.
CONTRACOR
®
DBS-25RC DBS-50RC Art. 10510/ 10515
Downloaded from
www.Manualslib.com
manuals search engine
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Dbs-50rc

Inhaltsverzeichnis