Disty box 300 Bedienungsanleitung Seite 23

Operating instructions
Downloaded from www.Manualslib.com
Function
Send always Keypad Information: This setting has to be used
if your base station is a distybase Duo or other specified ISDN
system.
Factory setting: 0
Set PARK
number
As an option, the registration process can be carried out
using the PARK number of your DECT base station (PARK =
Portable Access Rights Key). This can have up to 15 digits.
The procedure is advisable if the registration process cannot
be completed due to other active DECT base stations. Please
refer to the user's guide for your base station for further
details about PARK numbers.
Factory setting: no PARK number set.
Activate PARK/ARI
number
The PARK/ARI number set under programming point 80/85
is not used during the registration process.
The PARK/ARI number set under programming point 80/85
is used during the registration process.
Factory setting: 0
manuals search engine
Parameter Other input
code
40 2 #
80 PARK nummer #
81 0 #
81 1 #
EN
23