3. TECHNICAL DATA AND LIMITATIONS OF USE
Supply voltage: 220-240V, see electrical data plate
Delayed line fuses (220-240V version): indicative
values (Ampere)
Storage temperature: -10°C +40°C
Electrical
P1 Rated absorbed power [W]
data
P2 [W]
Mains voltage [V]
Mains frequency [Hz]
Current [A]
Capacitor [µF]
Capacitor [Vc]
Hydraulic
Max. flow rate [l/h]
data
Max. head [m]
Max. head [bar]
Max. pressure [bar]
Max suction depth [m/min]
Range of
Length of power cable [m]
use
Type of cable
Grade of motor protection
Insulation class
Liquid temperature range [°C]
according to EN 60335-2-41 for
domestic use
Max. particle dimension
Max. ambient temperature [°C]
Weight
DNM GAS
Net/Gross weight approx. [kg]
The pump cannot support the weight of the pipes, which must be supported in some other way.
4. MANAGEMENT
4.1 Storage
All the pumps must be stored in a dry covered place, with possible constant air humidity, free from vibrations and dust.
They are supplied in their original pack in which they must remain until the time of installation.
4.2 Transport
Avoid subjecting the products to needless impacts and collisions.
4.3 Weight and dimensions
The adhesive plate on the packaging indicates the total weight of the pump and its dimensions.
5. WARNINGS
The pumps must never be carried, lifted or allowed to operate suspended from the power cable; use
the handle provided.
The pump must never be allowed to run when dry.
It is recommended to open/close the venting/drainage caps (2 and 6) without applying excessive force.
Model
P1=650
8.64/10.84
ENGLISH
Model
P1= 650
P1= 850
P1= 1100
P1= 640
P1= 920
P1=850
650
850
400
600
3.11
3.88
12.5
12.5
3000
3180
39
43
3.9
4.3
8 m / < 3min
9.06/11.26
Table 3
2
Line fuses
220-240V 50Hz
4
4
6
4
6
P1=1100
P1=640
1100
640
750
380
1~220-240 AC
50
4.58
3.10
16
16
450
3750
3600
45
32
4.5
3.2
6
6 m / < 3min
1.5
H07 RNF
IP X4
F
0 °C / +35 °C
Clean water
+40 °C
1'' M
9.84/12.04
9.7/11.7
Table2
P1=920
920
560
4.20
12.5
4800
40
4.0
10.5/12.5