What's In The Box; Product Overview - Motorola Sonic Maxx 810 Schnellstartanleitung

English (EN )
1. INTRODUCTION
Congratulations on your purchase! This manual includes information about "Sonic Maxx 810" Bluetooth Party
Speaker. We encourage you to take a few minutes to read this manual, which describes the product and
includes step-by-step instructions to help you to set up and get started. Read and understand all the safety
instructions before using your product.

2. WHAT'S IN THE BOX

1) Main unit 2) USB Charging cable

3. PRODUCT OVERVIEW

1
5
6
12 14
13
4. Power/Charging
1). Connect the Charging cable into the speaker's micro-USB DC in charging port. Connect the other end of
the Charging cable to an external DC 5V/2A power source. It takes about 6-8 hours to full charge the speaker.
2). Press and hold the Power button
3). Press the power button
4). You can use this speaker as a battery charger for your rechargeable USB devices. Connect your USB
device to the USB port on the rear of this Speaker.
The speaker is powered by the built-in rechargeable battery. After power-on, the display shows the battery
level immediately, you can check the status of the Speaker battery by display.
Standby Mode
The product will enter into sleep mode after 15 minutes without operation.
•If the Speaker is powered by the battery, it will auto power o if no action for 15 minutes.
•If the Speaker powered by AC or DC power source, the product will enter standby(O ) mode if no action for
15 minutes.
1
3) Aux cable
2 4
3
7 9 11
8 10
16
15 17
3 second to power on the speaker.
3 seconds to power o the speaker.
4) Microphone
1) EQ/TWS
2) Power and
mode(BT/FM/USB/AUX)
3) Light control button
4) Bass Boost
5) Echo/Mic Volume-/+
6) Mic/Echo switch
button
7) Skip –
8) LED display
18
5) User manual
9) Skip+
10) Play/pause
11) Volume -/+ control
12) Handle
13) USB port.
14) Micro-USB DC in jack
15) Aux in jack
16) Mic 1 jack
17) Mic 2 jack
18) Speaker