Zelmer ZSB4799 Benutzerhandbuch Seite 10

PL EN
can also choose to use the start knob for speed control, after you do that, you cannot use the function
button in the meantime.
The glass jar capacity is 1.75 L.
Blending with Speed Knob
Pour in the ingredients and cover the glass bowl (Fig. 1), and then place the bowl into the host (Fig. 2)
and turn clockwise (Fig. 3). Lift the glass bowl to check it is locking whether or not.
Plug in the appliance and rotate the start knob to which speed you need.
At the end of preparation, rotate the start knob to position , unplug the appliance and wait until the
blades come to a complete stop...
Turbo function
When you press button "Turbo", you should press it continuously, when the foods are finished, please
release it.
Ice Crushing function
When you press this button, a cycle is working and all process will last for 60s.
Smoothie function
When you press this button, it will work close to maximum power for 1min.
MANITENANCE AND CLEANING
Before cleaning, always turn off the appliance and unplug it from the power supply.
Do not immerse the appliance and power cord in water or other liquids or wash them in the dishwasher.
Wipe off the toaster with a damp cloth and a little dish washing detergent. Do not use any abrasive
scouring agents, steel wool, metal objects, hot cleaning agents or disinfectants, since they can damage
the appliance.
During the cleaning process, special care must be taken with the blades and they are very sharp.
It is recommended to clean the appliance regularly and remove all traces of food.
If the appliance is not maintained in good cleaning condition, its surface can degrade and inexorably
affect the life of the appliance and lead to a dangerous situation.
The following parts are suitable for cleaning in the dishwasher: Jug. Jar lid, measuring cup.
Self-cleaning function
Introduce water and a small amount of detergent into the jar.
Select the position "Pulse"
Removable blades for effective cleaning
Loosen the fixing ring of the blades by turning it clockwise.
Remove the fixing ring from the blades and clean all the parts.
Once clean, replace the blade assembly and turn the blade fixing ring in the opposite direction.
10