Sony BRAVIA KD-85XF85-Serie Referenz-Anleitung Seite 4

• For safety reasons, it is strongly recommended that you use
Sony accessories, including:
 Wall-Mount Bracket SU-WL450 (Except KD-85/75XF85xx)
• Be sure to use the screws supplied with the Wall-Mount Bracket
when attaching the Wall-Mount Bracket to the TV set. The
supplied screws are designed as indicated by illustration when
measured from the attaching surface of the Wall-Mount Bracket.
The diameter and length of the screws differ depending on the
Wall-Mount Bracket model.
Use of screws other than those supplied may result in internal
damage to the TV set or cause it to fall, etc.
KD-85/49/43XF85xx, KD-49/43XF87xx
8 mm – 12 mm
KD-75/65/55XF85xx, KD-65/55XF87xx
10 mm - 13 mm
Transporting
• Before transporting the TV set, disconnect all cables.
• Two or more people (three or more people for KD-85XF85xx) are
needed to transport a large TV set.
• When transporting the TV set by hand, hold it as shown below.
Do not put stress on the LCD panel and the frame around the
screen.
• When lifting or moving the TV set, hold it firmly from the
bottom.
KD-85XF85xx
4
GB
Screw (M6)
Wall-Mount Bracket
TV's rear cover
Screw (M6)
Wall-Mount Bracket
TV's rear cover
KD-75/65/55XF85xx, KD-65/55XF87xx
KD-49/43XF87xx, KD-49/43XF85xx
• When transporting the TV set, do not subject it to jolts or
excessive vibration.
• When transporting the TV set for repairs or when moving, pack
it using the original carton and packing material.
Topple prevention
KD-85XF85xx
8 mm – 12 mm
Cord (not supplied)
M6 screw (not supplied)
1.5 N·m/1,5 N·m
{15 kgf·cm}
Screw (not
supplied)