Technical Specifications - Chauvet Professional DRB-CURVEKITX2 Schnellanleitung

EN
Mounting
Before mounting this product, read the
Mounting Diagram
Rig Bar 1
Overhead View
Mounting Procedure
1. Insert the Rig Bar Speego locking bars into the female Speego connections, and Insert alignment nodules into
the alignment holes, on the Rig Bar.
2. Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.
3. Twist the tightening knob clockwise until the DRB-Curve Kit is secure to the Rig Bar.
4. To detach the DRB-Curve Kit from the Rig Bar, reverse the previous steps.

Technical Specifications

Dimensions and Weight
Length
5.7 in (145 mm)
Note: Dimensions in inches are rounded.
Ordering
Product Name
DRB-Curve Kit
3
QUICK REFERENCE GUIDE
Safety Notes, as well as those for the attached products.
Alignment nodule
connection
Male Speego
connection
Width
3.9 in (99 mm)
Item Name
DRB-Curve KitX2
Rig Bar 2
Height
5.3 in (134 mm)
Item Code
23091622
Male Speego
Tightening
Knob
Weight
1.2 lb (0.54 kg)
UPC Number
781462219703
DRB-Curve Kit QRG Rev. 1
Spring
Knob
Locking
Bar