Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Mounting (Hanging)
Before mounting this product, read the
Mounting Diagram (Hanging)
Conical (x2)
Mounting Procedure
1. Insert alignment conicals into the alignment holes and allow magnets to connect.
2. Insert the Rig Bar Speego locking bars into the female Speego connections on the F-Series panel.
3. Twist the spring knob on the Rig Bar Speego by 90°, until it locks into place.
4. Twist the tightening knob clockwise until F-Series panel is secure to the Rig Bar.
5. To detach the Rig Bar from the F-Series panel, reverse the previous steps.
Warning! The magnetic attachments are not load-bearing, and are intended for alignment assistance
only. Do not release panel until the hanging hardware has been fully secured.
Technical Specifications
Dimensions and Weight
Length
19.67 in (499.8 mm)
Load Capacity (Hanging)
800 lb (363 kg)
Note: Dimensions in inches are rounded.
Ordering
Product Name
DRB-F50CM
5
QUICK REFERENCE GUIDE
Safety
Notes, as well as those for the attached products.
Alignment
Width
2.36 in (60 mm)
Load Capacity (Stacking)
Item Name
DRBF50CM
Male Speego
Connection
4.72 in (120 mm)
1,950 lb (885 kg)
Item Code
23091602
Rig Bar Speego
Tightening
Knob
Female Speego
Connection (x2)
(For use with
DRB Curve Kit)
Height
Recommended Shackles
DRB-F50CM QRG Rev. 1
Spring
Knob
Locking
Bar
Weight
12 lb (5.5 kg)
1/2", 5/8"
UPC Number
781462219505
Werbung
Inhaltsverzeichnis
