Mounting Diagram; Mounting Procedure - Chauvet Professional GROUND SUPPORT 2 KIT Schnellanleitung

Mounting
Before mounting this product, read the

Mounting Diagram

Dual-function F-series

Mounting Procedure

1. Insert TR16 Screw Jack into the bottom of the dual function F-series rig bar panel.
2. Align the floor base panel with the female speego connection on the rig bar.
3. Use the tightening nut to adjust the height of the rig bar and floor base panel. Verify they are level with the
surface.
4. Turn the locking nut on the screw jacks to secure the position.
Ground Support 2 Kit QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes, as well as those for the attached products.
TR16 Screw Jacks
Rig Bar
Female Speego
connection
Locking Nut
Male Speego
connection
Dual-function F-series
Rig Bar
Tightening Nut
Floor Base
EN
4