Install The Software - NETGEAR N600 Anleitung

Install the Software

1. Insert the Resource CD in your computer's CD drive. If the CD main page does
not display, browse the files on the CD and double-click Autorun.exe.
2. Click Install the Software. The Software Update Check screen displays.
3. If you are connected to the Internet, click Check for Updates. If not, then
click Install from CD.
4. Accept the license agreement.
5. On the Setup Type screen, for Express (recommended) setup, click Next.
Insert Your Adapter
You are prompted to insert your adapter.
1. Insert the adapter into a USB port on
your computer, or connect it with the
USB cable (see "USB Cable and
Cradle" on the other side of this
guide).
Note: For best results, put the
wireless adapter at least 4 feet (1
meter) away from your router.
2. Click Next. The WNDA3100v2
software detects the adapter.
3. Follow the onscreen prompts for the NETGEAR wizard.
English
2