LG 32LH51 Serie Benutzerhandbuch Seite 7

You may nd di erent brightness and color of the panel depending on
your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.
Displaying a still image for a prolonged period of time may cause image
sticking. Avoid displaying a xed image on the TV screen for a long
period of time.
Generated sound
"Cracking" noise: A cracking noise that occurs when watching or turning
o the TV is generated by plastic thermal contraction due to tempera-
ture and humidity. This noise is common for products where thermal
deformation is required. Electrical circuit humming/panel buzzing:
A low level noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a product. It varies
depending on the product.
This generated sound does not a ect the performance and reliability
of the product.
Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.
Preparing
NOTE
Image shown may di er from your TV.
Your TV's OSD (On Screen Display) may di er slightly from that
shown in this manual.
The available menus and options may di er from the input source
or product model that you are using.
New features may be added to this TV in the future.
The items supplied with your product may vary depending on the
model.
Product speci cations or contents of this manual may be changed
without prior notice due to upgrade of product functions.
For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not t into your TV's USB port.
B
B
A A
Use a certi ed cable with the HDMI logo attached.
If you do not use a certi ed HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI Cable Types)
- High-Speed HDMI ® / TM cable (3 m or less)
- High-Speed HDMI ® / TM cable with Ethernet (3 m or less)
How to use the ferrite core (Depending on model)
- Use the ferrite core to reduce the electromagnetic interference in
the power cord. Wind the power cord on the ferrite core once.
[Wall side]
10 cm (+ / -2 cm)
<
*A 10 mm
=
<
*B 18 mm
=
[TV side]
7