Zoef Robot SAAR MK007S Benutzerhandbuch Seite 47

(B) Turn on Manual Mode from Automatic Mode
1.When SAAR is running in Automatic Mode, take up SAAR off the
surface on which it is running (Note: Do not touch or cover Anti-fall
Sensors at the bottom surface when taking SAAR), Automatic Mode
turns off and Driving Wheels stop automatically.
2.Mount Handheld Cover onto the bottom surface.
3.Short press 'CLEAN' button.Hold the Handheld Stripe and move SAAR
until its top surface faces to the area to be sterilized at a close
distance (better within 2cm), two UV-C lamps at the top surface
automatically turn on, boot into Manual Mode.
11