Zoef Robot SAAR MK007S Benutzerhandbuch Seite 44

(B) Non-bed Clean Mode
1.Take off Handheld Cover.
2.Turn on Main Power Switch at bottom surface to 'CLEAN' gear (middle gear).
3.Place SAAR onto the area to be sterilized.
4.Long press 'CLEAN' button at top surface, boot into Non-bed Clean Mode, in
which obstacle avoiding function is on.
5.SAAR will run in 'Non-bed Clean Mode' until the entire area is sterilized and
disinfected, then it will automatically stop.
6.When Non-bed Clean Mode is ongoing, short press 'CLEAN' button to turn it
off.
8