Sterilizing And Mites Eliminating Function - Automatic Modes - Zoef Robot SAAR MK007S Benutzerhandbuch

Sterilizing and Mites Eliminating Function ---
Automatic Modes
There are two automatic modes as below.
(A) Bed Clean Mode
1.Take off Handheld Cover.
2.Turn on Main Power Switch at bottom surface to 'CLEAN' gear (middle
gear).
3.Place SAAR onto the area to be sterilized.
4.Short press 'CLEAN' button at top surface, boot into Bed Clean Mode, in
which obstacle avoiding function is off.
5.SAAR will run in 'Bed Clean Mode' until the entire area is sterilized and
disinfected, then it will automatically stop.6.When Bed Clean Mode is
ongoing, short press 'CLEAN' button to turn it off.