Installation - Motorola RLN5926 Bedienungsanleitung

INSTALLATION

1. Remove the housing screws from
the back of the PTT button.
2. Remove the backer plate and
Velcro straps.
3. Attach the optional mounting
bracket to the PTT button as shown
in Figure 1 using the two housing
screws removed in step 1.
4. Using the optional mounting
bracket screw holes as a template,
place the bracket in the desired
location and using a 0.086" (#86)
diameter size bit, pre-drill the two
holes.
5. Use the mounting bracket screws to
attach the bracket to the desired
mounting surface using the holes
drilled previously in step 4.
4