Maintenance / Review; Support; Technical Specifications; Conformity/Standards - CSS AssistX Mobil Gebrauchsanweisung

20 | Instructions for Use
AssistX Mobil Repeater

10. Maintenance / Review

The device must be checked for safety and functionality at regular intervals.
The check must be done by trained specialist personnel only. The following
should be checked:
• Battery (replace every 3 years at the latest)
• Connectors for damage and soiling
• Damage to the housing
• Update Firmware
Configurator software is available at www.csslabs.de/
The AssistX Mobil
download (for Windows). You can use it to update the firmware of the repeater
via the USB connection (only for specialist personnel!).
3
Please note: If you update the repeater, all other components, transmit-
ters, receivers and other repeaters also need to be updated. Otherwise,
safety-critical system failures can occur!

11. Support

If you need any support or for technical questions about the product, please
contact the reseller where you purchased this product. If necessary, e. g. the re-
seller is not available or cannot help, send us an email to support@csslabs.de.
Please be sure to include a description of the problem and the serial number
of the device.

12. Technical specifications

Dimensions: 74 x 74 x 26 mm (without Antenna)
Weight: 130 g
IP Rating: IP 54
Power supply: 5 V , ~100 mA
Frequency: 869,225 MHz (Social Alarm)
Backup Battery: >8 h
Temperature ranges:
Use: 0 C to 45 C
° °
Transportation and storage: -10 C to 50
°

13. Conformity/Standards

This product is CE compliant.
meets the requirements of DIN VDE 0834.
AssistX Mobil Repeater

14. Environmental protection and disposal

All electrical and electronic devices must not be disposed with general house-
hold waste, but must be disposed at designated disposal points. This product
is subject to the European Directive 2002/96/EC and must therefore be proper-
ly disposed at the WEEE collection points.
WEEE DE94635635
| 21
Instructions for Use
AssistX Mobil Repeater
C
°
EN