Datamars 46000W Installationsanleitung Seite 69

Problems with the energizer
There are no lights on the energizer.
Power supply or energizer faulty?
1 Check that the mains power supply cord set is firmly attached to the energizer and
that the mains power supply is on.
2 If the energizer is still not operating, it may require servicing.
When the energizer is pulsing, there are only red
lights illuminating (indicating that the output voltage
is less than 3 kV)
A branch may have fallen on the fence or something else may be
entangled in it?
Disconnect the energizer from the mains power supply, then check the fence.
There may be a short on the fence or on the lead out cable connecting
the energizer to the fence?
Check for shorting using a Fence Remote with Fault Finder or Fault Finder. Fix fault(s)
as required.
69