Herunterladen Diese Seite drucken
S&P CR-20 Anschlussanleitung
Vorschau ausblenden Andere Handbücher für CR-20:

Werbung

CR-20 / CR-30
Instrucciones de conexionado para cortinas COR-IND
Wiring instructions for COR-IND air curtains
Instructions de raccordement pour les rideaux d'air COR-IND
Istruzioni per il collegamento elettrico della barriere d'aria COR-IND
Instruções de ligação para cortinas COR-IND
Anschlussanleitung des türluftschleiers COR-IND
Aansluitinstructie voor COR-IND luchtgordijnen
Podlaczenie elektryczne kurtyn powietrznych COR-IND
COR-IND légkfüggönyök bekötési rajzai
Οδηγιεσ ηλεκτρικησ εγκαταστασησ αεροκουρτινασ
COR-IND

Werbung

loading

Inhaltszusammenfassung für S&P CR-20

  • Seite 1 CR-20 / CR-30 Instrucciones de conexionado para cortinas COR-IND Wiring instructions for COR-IND air curtains Instructions de raccordement pour les rideaux d'air COR-IND Istruzioni per il collegamento elettrico della barriere d'aria COR-IND Instruções de ligação para cortinas COR-IND Anschlussanleitung des türluftschleiers COR-IND...
  • Seite 2 Fig.1...
  • Seite 3 Fig.2...
  • Seite 4 Wiring diagram for remote control operation using the CR-20 / CR-30 controllers. Connect the terminal block connections in the CR-20 or CR-30 controllers to those as marked in the COR-IND air curtain as per the diagram. All interconnecting cables should have a minimum cross-section of 0.5mm .
  • Seite 5: Einzelheiten Der Bedienung Des Geräts Sind Der Jeweiligen

    Português Controlo CR-20 (Fig. 1) / CR-30 (Fig. 2) Esquema controlo remoto. Ligar os bornes do controlo remoto CR-20 / CR-30 aos correspondentes no aparelho. Os cabos de interligação devem ter como mínimo 0,5 mm2. A sequência de funcionamento é indicada nas instruções do aparelho.
  • Seite 6 Magyar CR-20 / CR-30 szabályozók (1, 2 ábra) Bekötési rajz a CR-20 / CR-30 távszabályozók használatához. Csatlakoztassa a csatlakozódobozh oz a CR-20 / CR-30 szabályozókat ahogy az a COR-IND légfüggönyök útmutatójában szerepel. Mindegyik bekötővezetéknek minimum 0,5 mm2 keresztmetszetűnek kell lennie. A csatlakoztatás után ellenőrizze, hogy...

Diese Anleitung auch für:

Cr-30