Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Clean the collecting trough and the cooling water pump after each application in order to guarantee the cooling of the cutting-off
wheel. To empty the trough (5), remove the closing plug (3) and allow the water to drain into a suitable vessel.
•
Clean the inside of the cover hood regularly.
TRANSPORT
Remove the mains plug before each transport.
Transport the radial tile cutter only when the cutting unit is fixed:
For this purpose, slide the two stops for longitudinal cutting/transport towards each other as far as possible and tighten them.
That's how you avoid injuries on the hands.
Drain the cooling solution completely before any transport.
A second person is required to assist with the transport.
STORAGE
Remove the mains plug from the socket.
•
Store unused equipment in a dry, locked place out of the reach of children.
•
Before a longer storage observe the following in order to prolongate the service life of the machine and to guarantee a smooth
running operation:
- thoroughly clean the machine
HANDLING, TRANSPORT AND STORAGE OF CUTTING-OFF
WHEELS
Cutting-off wheels are fragile and sensitive to shocks and impacts.
Hence, mind the following points:
•
Prevent the wheel from falling and protect it against sudden impacts.
•
Do not use dropped or damaged wheels.
•
Avoid vibration or shocks during the work.
•
Avoid damages on the locating bore.
•
Avoid any loading of the surface.
•
Store the cutting-off wheels horizontally or vertically in a dry frost-free place at a constant moderate temperature.
•
Store the cutting-off wheels in their original packaging or in special containers and shelves.
GUARANTEE
Please observe the enclosed terms of guarantee.
POSSIBLE FAULTS
Before each maintenance and cleaning work
- switch off device
- wait for complete standstill of the stone cutter
- pull out main plug
After repair and before re-operation control and reactivate all security installations.
22
Werbung
Inhaltsverzeichnis
