Inhaltsverzeichnis
Werbung
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for making separating cuts in
plastic, metal and rubber while resting firmly against the ma-
terial being sawn. It is suitable for straight cuts with a mitre/
bevel angle of up to 45°. The saw blade recommendations
are to be observed.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off button for on/off switch
(2) On/off switch
(3) Handle (insulated gripping surface)
(4) Locking clip for cover
(5) Roller guide
A)
(6) Bandsaw blade
(7) Saw blade guide
(8) Direction of rotation arrow on housing
(9) Lever for bandsaw blade pre-tension
Bosch Power Tools
(10) Worklight
A)
(11) Battery
(12) Auxiliary handle (insulated gripping surface)
(13) Cover for bandsaw blade
(14) Battery release button
A)
(15) Battery charge indicator
(16) Button for battery charge indicator
(17) Roller for bandsaw blade
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Bandsaw
Article number
Rated voltage
No-load speed
Saw blade dimensions
Max. cutting depth
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
B)
ure during operation
and
during storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-20.
Typically, the A-weighted sound pressure level of the power
tool is 79 dB(A). Uncertainty K = 3 dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-20:
2
Cutting metal: a
< 2.5 m/s
, K = 1.5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
English | 13
A)
GCB 18V-63
3 601 BA0 4..
V=
18
m/min
162
mm 733 × 12.7 × 0.35
mm
63.5
A)
kg
3.7–4.7
°C
0 to +35
°C
−20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
2
.
1 609 92A 59J | (21.11.2019)
Werbung
Inhaltsverzeichnis
