Start Mode; Scan Document; Save Document; Open Document Browser - Rehan i-Reader2 Bedienungsanleitung

9

Start mode

The Start mode is the mode the i-Reader 2 starts in when you turn the device on. In this
EN
mode you can have the following controls:

Scan document

Switch on the device and put the camera in reading position. Align your document with
the document placement markers. Press the PLAY button to scan the document. The
device will sound a capture sound and starts ticking to indicate it is processing the
document. Press the STOP button to cancel processing. Once scanned, the read aloud
mode will start automatically. See Chapter 9 Read aloud mode for more information.

Save document

Press the PLAY and STOP button simultaneously to scan and save a document on the
internal storage. Follow the device instructions to scan multiple pages if you so desire.

Open document browser

Press the LEFT and RIGHT button simultaneously to open the document browser. See
Chapter 11 Document browser for more information.

Change system language

Press the STOP and UP button or STOP and DOWN button simultaneously to change the
system language.

Change system voice

Press the STOP and LEFT button or STOP and RIGHT button simultaneously to change
the system voice.

Turn automatic language detection on or off

Press the UP and DOWN button simultaneously to turn automatic language detection
on or off. If this is turned on, the device will process the text and read it in the observed
language of the document. If this is turned off, the device will process the text according
to the selected system language and system voice. If automatic language detection fails,
turn automatic language detection off.

Scan document in column mode

Press the PLAY and LEFT button simultaneously to scan the document in column mode.
Use this if the device doesn't read documents such as invoices or bank receipts as
expected.

Open menu

Press the UP and LEFT button simultaneously to open the menu. The menu allows you to
check the software version, set the date and time and reset the device to factory defaults.
See Chapter 12 Menu for more information.
12 i-Reader 2