Cleaning And Maintenance Of The Dust Bag; Cleaning And Maintenance Of The Self-Cleaning Filter; Cleaning The Outside - crossvac x500 Benutzerhandbuch

x500 - Central Vacuum System

8.3 CLEANING AND MAINTENANCE OF THE DUST BAG

1. Remove the central vacuum unit's dust container.
2. Disconnect the dust bag from its connector
3. Seal the dust bag's opening with the self-adhesive
tape to prevent dust from spilling out of the bag.
4. Fit a new dust bag by inserting it into the connector.
5. Re-connect the central vacuum's dust container.
8.4 CLEANING AND MAINTENANCE OF THE SELF-CLEANING
FILTER
1. Remove the central vacuum unit's dust
container.
2. Take out the self-cleaning filter
3. Shake the self-cleaning filter thoroughly to
remove all dust and dirt (washable).
4. Re-fit the self-cleaning filter in its housing taking
care to ensure that it's reinstalled securely**.
5. Re-fit the central vacuum dust container.
**Bend the self-cleaning filter to fit it into the track
within the rim of the central vacuum unit.

8.5 CLEANING THE OUTSIDE

We recommend to clean periodically the outside of the central vacuum unit using a soft cloth
moistened in water and neutral soap, allowing it to dry completely before starting the system again. Do
not use solvents, alcohol or any chemical product when cleaning the outside.
.
*
*Self-cleaning filter tab
Central vacuum track
27
User guide
Fit the filter into the track
Fit the filter into the
Bend the filter
track