User Guide; Choosing The Filtration System - crossvac x500 Benutzerhandbuch

x500 - Central Vacuum System

7. USER GUIDE

7.1 CHOOSING THE FILTRATION SYSTEM

CROSSVAC x500 offers the choice of three different filtration options to suit all
possible requirements:
HEPA + PRO-TECTA FILTER
High degree of filtration (Hepa + Pro-Tecta + Cyclonic Cone).
1. Highly-efficient filtration system: 99,97% efficiency in capturing particles to
a size of 3 microns.
2. Extended periods without the need for maintenance due to the Pro-Tecta
filter.
3. Simple maintenance assisted by the ease of removal and re-installation of
the Pro-Tecta and Hepa filters.
4. The option to use a standard plastic bag to collect the dust in the dust
container.
FILTER DUST BAG
20L 5-ply dust bag made from special filter material.
1. Excellent filtration system
2. The dust is propelled into the interior of the dust bag by a valve so there is
no contact with the particles Once the bag is full simply remove it and replace
it with a new one.
SELF-CLEANING FILTER SYSTEM
Dust bag made from filter material (teflon-coated polyester) with a weight located at its centre causing it
to change position when the central vacuum is running: with the unit switched off the bag at rest forms
a conical shape with the weight facing downwards. When the central vacuum unit is switched on the
bag inverts before returning to the rest position once it is switched off again, thereby resulting in dust
attached to the filter bag dropping into the bin.
1. Extended periods without the need for maintenance due to the
filtration system.
2. Maintenance would normally be carried out by an approved service
technician.
3. Efficient filtration system.
It is possible to combine the dust bag with the self-cleaning dust filter to extend the life of the dust bag
and, at the same time further increase the filtration efficiency of the system.
22
User guide