Fixing The Central Vacuum Unit To The Wall - crossvac x500 Benutzerhandbuch

x500 - Central Vacuum System
6. FIXING THE CENTRAL VACUUM UNIT TO
THE WALL
All CROSSVAC central vacuums come supplied with a wall
bracket comprising two interlocking pieces, one attached to the
rear of the machine, the other to be attached to the wall onto
which is slotted the other part of the bracket.
The central unit should be fixed permanently to the wall by means
of this bracket.
The central vacuum unit should be installed in a well-aired location providing easy access, far away
from any heat source. Similarly, it should be located close to an electrical supply point. It should be
placed at a height of approximately 0.6m from the floor which will allow for the emptying of the bin. It is
advisable to leave a space on either side of the unit to permit easy handling of the unit.
Wherever possible the central vacuum should always be located on a supporting wall or a concrete
wall to avoid vibrations. Once the location has been chosen, fix the bracket to the wall and hang the
central vacuum unit onto the bracket.
Vacuum unit hanging bracket
21
User guide
Wall hanging bracket