INNOBIZ Omelia Gebrauchsanleitung Seite 21

Repairs
Please refer to the table below in case of
Problem
encountered
Doesn't turn on
No mist or
abnormal mist
Water escapes from
the product
abnormal operation of the product:
• Check the reservoir contains enough
water, add more without exceeding
the ''Max'' level.
• Check the power cord is properly
connected. Unplug, then check the
cable and reconnect it carefully.
• Check the water level. In case of in-
sufficient water, add the appropriate
amount to the reservoir. If the water
level exceeds the maximum level
indicated (100 ml), pour the excess
water out.
• Check the ventilation system isn't
clogged with dust or dirt that could
prevent the mist from escaping.
• Check that the mist outlet in the cap
isn't obstructed.
• Check that the glass bell is secu-
rely attached to the base. Remove the
glass bell and replace it on its base.
Recommended
course of action
EN
21