Main parts (image A)
1
Control slider
2
Paper entry
3
Shredder
Safety instructions
-
WARNING
•
Ensure you have fully read and understood the instructions in this document
before you install or use the product. Keep this document for future
reference.
•
Only use the product as described in this document. Any other use may
cause (serious) injuries.
•
Do not use the product if a part is damaged or defective. Replace a damaged
or defective product immediately.
•
Do not drop the product and avoid bumping.
•
This product may only be serviced by a qualified technician for maintenance
to reduce the risk of electric shock.
•
Ensure that there is sufficient light when installing and using the product.
•
Position the product close to a power outlet, so the power cable can be
unplugged easily.
•
Make sure the power cable is positioned in a way that prevents tripping or
falling.
•
Unplug the product from the power source and other equipment if problems
occur.
•
Do not unplug the charger by pulling on the cable. Always grasp the plug
and pull.
•
Connect to a grounded outlet only.
•
Do not let the power cable touch hot surfaces.
•
Do not expose the product to direct sunlight, naked flames or heat.
•
Do not expose the product to water or moisture.
•
Do not immerse the product in water or other liquids.
•
Do not use the product if the surface is cracked.
•
Place the product on a stable and flat surface.
•
Do not overfill the container. Empty the container before using the product
again.
•
Be careful when handling the blades.
4
Carrying handle
5
Container
6
Power cable
5