AEG KK 14 Bedienungsanleitung Seite 25

Fire hazard!
• For 230 V power supply,
ensure the mains voltage
matches the input voltage
specified on the device
(230 V AC) to prevent a
fire hazard and damage to
the device.
For 12 V power supply, en-
•
sure the on-board voltage
matches the input voltage
specified on the device
(12 V DC) to prevent a fire
hazard and damage to the
device.
• Do not modify the plug in
any way.
• The coolbag is not suit-
able for continuous use.
Otherwise overheating and
permanent damage may
result.
• Do not cover the device
during use, as it may be
damaged from extreme
heating.
Immediately stop using the
•
device if you notice smoke
or an unusual odour.
Risk of electrical
shock!
Do no expose the device
•
to rain or wet conditions.
Avoid pouring or dripping
water or other liquids over
it. If water penetrates elec-
trical devices, the risk of
electric shock increases.
• Please verify there is no
moisture on plugs and ca-
bles. Never connect the de-
vice to the on-board power
system with wet hands.
• Always unplug the cable
from the 12 V car outlet by
the plug. The cable may
otherwise be damaged.
• Do not use device if
damaged. Damage to the
device or the charging
cable increases the risk of
electrical shock.
English 25