Clear Service List (*); Managing Stations: Channel List; Operating The Channel List; Moving A Channel - Finlux 55FLSY990SL Bedienungsanleitung

If you start Digital Cable scan process, the following
screen will be displayed.
You can select frequency ranges from this screen. For
highlighting lines you see, use " " or " " button. You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
on the remote control. After this operation, you can set
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the Tv will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When fi nished, press OK button to start
automatic search. Automatic searching screen will be
displayed during the process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.

Clear Service List (*)

(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press " " or
" " button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
Press OK to cancel. Select Yes by pressing " " or " "
button and press OK to delete all of the channels.
A02_[GB]_MB61_DVB_TC_GOLD12_5110UK_55990LED_10076845_50208166.indd 54 A02_[GB]_MB61_DVB_TC_GOLD12_5110UK_55990LED_10076845_50208166.indd 54
Managing Stations: Channel
List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
• Press "MENU" button to view main menu. Select
Channel List item by using " " or " " button. Press
OK to view menu contents.
Select Edit Channel List to manage all stored
channels. Use " " or " " and OK buttons to select
Edit Channel List.

Operating the Channel List

• Press " " or " " button to select the channel that
will be processed. Press " " or " " button to select
a function on Channel List menu.
• Use P+/P- buttons to move page up or down.
• Press BLUE button to view fi ltering options.
• Press "MENU" button to exit.

Moving a Channel

• First select the desired channel. Select Move option
in the channel list and press OK button.
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen
will be displayed. Select Yes if you want to move the
channel and press OK.
• Press OK button to process. Selected channel is
now moved.
English - 54 -
14.11.2011 17:02:40 14.11.2011 17:02:40