Emerio BS-110790 Bedienungsanleitung Seite 6

BS-110790
PARTS DESCRIPTION
1. Lid
2. Warming pan
3. Cool touch handle
4. Frame
5. Warming tray
6. Indicator light
7. Temperature control knob
BEFORE USE
1. Remove all packaging from the appliance.
2. Clean the appliance according to the instructions in the section "CLEANING AND MAINTENANCE".
3. Pre-heat the appliance for about 10 minutes to burn off protective coating on first use. There will be a faint
smell when using the appliance for the first time. This is quite normal and will fade with use.
4. Food warmed on the tray must be pre-cooked and already hot as this appliance is not designed for heating
from cold or frozen.
HOW TO USE
1. Place the appliance on a stable, heat-resistant surface.
2. Put the plug into the mains power supply.
3. Switch the temperature control knob to your desired temperature. The indicator light will turn on when the
appliance starts heating and turn off when the desired temperature is reached.
4. Place the cooked food into each of the warming pans and adjust the temperature to the desired heat. The
indicator light will cycle on and off while the appliance is maintaining the set temperature. (This appliance
is not designed for cooking raw food.)
5. It is not recommended to keep this appliance on for more than 6 hours continuously.
6. After use, unplug the appliance from the mains power supply and allow it to cool thoroughly.
Note: You can also remove the warming pans and frame. Place your heat-resistant utensils with cooked food
onto the warming tray. Select your desired temperature to warm the food.
Caution: This appliance will get hot during use, please operate it carefully.
CLEANING AND MAINTENANCE
1. Always ensure the appliance is unplugged from the mains power supply and has thoroughly cooled before
cleaning or storing.
- 5 -
EN