Remove A Device From A Logical Network Group; Standby Mode; Ac Outlets Connection; Connection Via Power Strip - Icy Box IB-Pl200 Handbuch

http://www.icybox.de http://www.icybox.de

remove a device from a logical network Group

for example, device A and device B are in the same logical network group, if uses want to remove device A from this
logical network group, just follow the procedure in step 1 by pressing GROUP button of device A for 10 seconds. This
makes device A not able to communicate with device B. If users want to remove a device from a logical network group
containing 3 or more devices, just operate the GROUP button of this device as in step 1.

stAnDBY MODe

Standby mode enables the PLC device to save power consumption. The device automatically enters standby if no Ethernet
cable is connected, or the PC connecting this device enter standby, hibernation, or powered-off over two minutes. During
standby, only POWER LED blinks at slower rate. To exit standby, insert the Ethernet cable to the device or resume PC back
to running.
note: Some computers support Wake on LAN function and may make this our PLC device not can't enter the standby mode.
enhance Plc performance during installation
This Powerline device sends data to and from each other over the existing electrical wiring in your home, and may be
affected by electrical noises or the length of the wiring at your house. Keep the following in mind when placing this Power-
line device at home.

Ac outlets connection

Avoid connecting this device to an uninterruptible power supply (UPS) or backup power supply device. For best results, we
recommend connecting the adaptors directly to a wall outlet. Avoid connecting high power-consumption appliances to the
same wall outlet. Plug these power consuming devices onto a noise filtering power strip to prevent these device interfere
with this Powerline device.

connection via power strip

If you must connect this device to a power strip, please keep the following recommendation in mind:
• Make sure the power strip does not have a noise filter or a surge protector, as these features may impair communica-
tion signaling of the Powerline device sent over the electric wiring, and its throughput or distance will be degraded.
• Use a power strip with an AC cord that is as short as possible.
• Do not connect the adaptor to a power strip that receives power from another power strip.

electrical interference

Certain electrical devices emit electrical noise. If this noise is spread over to the electrical wiring in your home, it may in-
terfere with the performance, speed, and reliability of this device. For best results, we recommend connecting an electrical
noise filter to noise emitting appliances.
the following appliances are more likely to produce noise:
• Battery chargers (including cell phone chargers)
• Hair dryers
• Power drills
• Halogen light
• Vacuum cleaner
Additionally, this product may interfere with the following appliance:
• Lights or lamps which have a touch-sensitive on/off feature
Powerline Adapter
19 19