Product Description - Rebel BOX FLYER ZAB0114 Bedienungsanleitung

1. Insert one side of the USB connector into the drone.
2. Insert the other side of the USB cable into a compatible computer
USB port.
3. The red light on the USB charging cable will be on when charging.
The light will be off when charging is completed.
4. Disconnect the charging cable from PC and the drone once the
charging is complete. When you disconnect charging cable from the
drone, grasp and gently pull the plug, not the cord/cable. Do not
overcharge the drone.
notes:
• pay attention to connect the charging plug correctly into the drone.
• let the drone cool down after flying, before connecting it for charging.
• connect the drone only to compatible USB port for charging. Don't use
AC adapters.
• Do not let the battery go completely out of charge. Charge the device
at least once every month to keep its battery in good condition, even
if not used.
• Estimated charging time: around 50 minutes.
• Above charging time is only an estimated value and may vary due to
various miscellaneous reasons.
• Discontinue using and contact an authorized service point for check-
up or replacement if you notice any abnormalities of the battery (e.g.
leakage, expansion etc.).

ProDuct DEScriPtion

remote control
Owner's manual
En
15