Troubleshooting; Accessories - Sennheiser AudioBeam Bedienungsanleitung

Troubleshooting

16
Downloaded from www.Manualslib.com
Troubleshooting
If the LED operation indicator
problems may have occured:
The distance sensor has triggered
1. Someone has entered the security area of 4 meters in front of or
2. You are operating the device in rotating mode and the distance sensor
AudiBeam is defective
Please contact your Sennheiser distributor or the Sennheiser Customer
Service (for address, see last page).

Accessories

The following accessories are available from your Sennheiser distributor:
GZP 10 Mounting plate for wall and ceiling mounting
GZG 1029 Swivel joint for attachment to stands or the GZP 10 mounting plate,
includes
MZT 14 Mounting bolt for mounting goosenecks and swivel joints with
to table tops
MZT 100 Stable, metal table stand with
MZT 1019 Mounting bar for two units with
SEMS 3134 Floor stand with
manuals search engine
around AudioBeam and the distance sensor has triggered. After the
person has left this area, AudioBeam automatically turns on again after
30 seconds.
has triggered because objects or persons are located within the sensor
range of the built-in distance sensor.
o solve the problem, see: „Mounting AudioBeam movably or rotatably"
on page 14.
1 "
/
interchangeable thread
4
3
/
3 "
/
thread
8
lights up red, one of the following
"
thread
8
3 "
/
internal thread
8
3 "
/
thread
8