JVC AA-V100EG Bedienungsanleitung Seite 5

1
Make sure you unplug the camcorder's DC cord
from the AC Power Adapter/Charger. Plug the
AC Adapter/Charger's power cord into an AC
outlet. The POWER indicator lights.
2
Remove the battery pack's protective cap.
Attach the battery pack with the
aligned with the corresponding marks on the AC
Power Adapter/Charger. The CHARGE Indicator
begins blinking to indicate charging has started.
3
When the CHARGE indicator stops blinking but
stays lit, charging is finished. Remove the
battery by pushing up the protruding part.
Remember to unplug the AC Adapter/Charger's
power cord from the AC outlet.
NOTE:
Perform charging where the temperature is
between 10°C and 35°C. 20°C to 25°C is the
ideal temperature range for charging. If the
environment is too cold, charging may be
incomplete.
mark
Battery pack
BN-V107U
BN-V114U (optional)
•When charging Battery Packs after a long storage
period, charging time will be longer than the time
indicated above.
Charging time
approx. 1 hr. 30 min.
approx. 2 hr.
EN-5