Suggested Rackmount Installation For 3U Models In 2-Post Enclosures - Tripp Lite BP Serie Bedienungsanweisungen

Suggested Rackmount
Installation for 3U Models
in 2-Post Enclosures
1) Attach the support brackets (A) to both
rack posts (B) with user-supplied rack bolts
(C).
2) Attach mounting ears (D) to the mounting
holes on the middle of the Battery Pack's
sides (E), using the screws and washers
provided (F). Do not attach the mounting
ears to the Battery Pack's front mounting
holes.
3) Have one or more assistants lift the Battery
Pack and hold it in position until this step is
complete. Insert the UPS into its intended
rack space until the mounting surfaces of
its ears meet the back of the rack's rails.
Connect the mounting ears to the rails with
two user-supplied screws and flat washers
on each side (G).
Downloaded from www.Manualslib.com manuals search engine
Figure 2 (3U 2-Post)
Figure 3 (3U 2-Post)
Figure 1
(3U 2-Post)
3