Genius Trio Racer serie Handbuch Seite 2

A. Button Assignment:
B. Assembly
You have two methods to install the steering wheel. Please choose one and follow the directions.
1. Play on desk or table
① .
② .
③ .
2. Play on your thighs
① .
② .
③ .
How to take apart the attachments:
Slip out the thigh attachments as shown below.
C. Installation
1.
For PC
Hardware installation
① .
② .
③ .
Note: Do not connect the steering wheel to a USB hub. It only works when it is connected directly to the
USB port of the PC.
Driver installation
① .
② .
③ .
Downloaded from www.Manualslib.com
LED
L2
L1
L2
Dire ct ional
Pad
MODE
Connect the clamp to the base of the steering wheel as shown in Figure 1 below.
Place the TrioRacer Wheel in a comfortable driving position (on a desk or table) and press the base
unit down firmly on the surface. (See Figure 2)
Turn the clamp screw until the base is firmly connected. (See Figure 3)
Figure 1
Unpack the thigh attachments.
Turn the Wheel upside down and locate the assembly pinholes.
Insert the thigh attachments into the assembly holder on the bottom side then put the wheel on your
thighs as shown in figure 4.
Connect the pedals to the steering column.
Connect the power adapter cable to the steering column.
Connect the USB plug to the USB port of the PC.
The wheel has to be connected to the PC first. Then insert the driver CD into your CD-ROM drive.
If the installation program does not start automatically, click on "Start/Run/Browse" and select your
CD-ROM drive.
Double click on the file "setup.exe"
manuals search engine
R 1
Brake
R2
R 2
SELEC T
S TART
Figure 2
1
English
Gas
Figure 3
Figure.4