Inhaltsverzeichnis
Werbung
Downloaded from
www.Manualslib.com
2.10
2.10
2.10
2.10
2.10 Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.11
2.11
Installing Windows
Installing Windows
2.11
2.11
2.11 Installing Windows
Installing Windows
Installing Windows
Vista
Vista
Vista
64-bit With RAID Functions
64-bit With RAID Functions
64-bit With RAID Functions
Vista
Vista
TM
TM
TM
64-bit With RAID Functions
64-bit With RAID Functions
TM
TM
If you want to install Windows
/ SATAII HDDs with RAID functions, please refer to the document at the following path
in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.12
2.12 Installing Windows
2.12
Installing Windows
Installing Windows
Installing Windows
2.12
2.12
Installing Windows
Vista
Vista
Vista
Vista
Vista
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
64-bit Without RAID Functions
TM
TM
TM
TM
TM
If you want to install Windows
Windows
®
Vista
TM
64-bit OS on your SATA / SATAII HDDs and eSATAII devices
without RAID functions, please follow below procedures according to the OS you
install.
NOTE. Please notice in SATA AHCI ROM, the SATA ID description will start from 0000 to
0005, which is not correspondent to the SATAII port naming rule (SATAII_1 to
SATAII_6) on this motherboard.
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
2.12.1 Installing Windows
Functions
Functions
Functions
Functions
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs and eSATAII devices without NCQ and Hot Plug
functions
STEP 1: Set up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows
2.12.2 Installing Windows
2.12.2 Installing Windows
2.12.2 Installing Windows
2.12.2 Installing Windows
2.12.2 Installing Windows
RAID Functions
RAID Functions
RAID Functions
RAID Functions
RAID Functions
If you want to install Windows
SATAII HDDs without RAID functions, please follow below steps.
3 4
3 4
3 4
3 4
3 4
ASRock
manuals search engine
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
®
XP / XP 64-bit / Vista
TM
/ Vista
TM
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
XP / XP 64-bit / Vista
®
®
XP, Windows
®
XP 64-bit, Windows
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
XP / XP 64-bit Without RAID
®
®
XP or Windows
®
XP 64-bit on your SATA / SATAII
Advanced screen
®
XP / Windows
®
XP 64-bit OS on your system.
Vista
Vista
Vista
Vista
Vista
/ Vista
/ Vista
/ Vista
/ Vista
/ Vista
TM
TM
TM
TM
TM
TM
TM
TM
TM
TM
®
®
Vista
TM
or Windows
®
Vista
TM
64-bit on your SATA /
AOD790GX/128M
Motherboard
/ / / / /
TM
TM
TM
TM
TM
64-bit on your SATA
/ / / / /
TM
TM
TM
TM
TM
®
Vista
TM
or
IDE Configuration.
64-bit Without
64-bit Without
64-bit Without
64-bit Without
64-bit Without
Werbung
Inhaltsverzeichnis
