Herunterladen Inhalt Inhalt Diese Seite drucken

Specifications - Rockford Fosgate Punch serie Einbau Und Betrieb

Vorschau ausblenden Andere Handbücher für Punch serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
S
PECIFICATIONS
MODEL- PUNCH
Maximum Power Rating
All Channels
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Per Channel
2Ω Load Per Channel
4Ω Load Bridged (Mono)
Dimensions: (with Endbell)
Battery Fuse Rating (Amp)
(External to Amplifier)
Fuse Type
MODEL- PUNCH
Maximum Power Rating
All Channels
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Per Channel
2Ω Load Per Channel
4Ω Load Bridged (Mono)
Dimensions: (with Endbell)
Battery Fuse Rating (Amp)
(External to Amplifier)
Fuse Type
Signal-to-Noise Ratio
Crossover Slope
Crossover Frequency (Model 201S)
Crossover Frequency (All Other Models)
Frequency Response
Bandwidth
Damping Factor @ 4Ω (at output connector )
Slew Rate
IM Distortion (IHF)
Acceptable Signal Voltage Range
Protection
Equalization (45Hz Punch Bass) (Model 201S)
Equalization (45Hz Punch Bass) (All Other Models)
Input Impedance
Specifications subject to change without notice
14
Downloaded from
www.Manualslib.com
201S
600 Watts
50 Watts x 2
100 Watts x 2
200 Watts x 1
Height
2.38" (6.05cm)
Width
9.85" (25.02cm)
Length
10.07" (25.58cm)
20A
ATC
501S
1500 Watts
125 Watts x 2
250 Watts x 2
500 Watts x 1
Height
2.38" (6.05cm)
Width
9.85" (25.02cm)
Length
12.07" (30.66cm)
50A
AGU
manuals search engine
301S
900 Watts
75 Watts x 2
150 Watts x 2
300 Watts x 1
2.38" (6.05cm)
9.85" (25.02cm)
11.07" (28.12cm)
30A
ATC
601S
1800 Watts
150 Watts x 2
300 Watts x 2
600 Watts x 1
2.38" (6.05cm)
9.85" (25.02cm)
13.07 (33.20cm)
50A
AGU
>100dB A-weighted
12dB/octave Butterworth
Fixed 80Hz LP, AP, 120Hz HP
variable from 50Hz to 250Hz
20Hz to 20kHz ±0.5dB
20Hz to 200kHz ±3dB
>200
30 Volts/ms
<0.05%
Variable from 100mV to 6V (RCA Input)
Variable from 0.5V to 11V (High Level Input)
NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
Switchable from 0dB to +6dB to +12dB
Variable from 0dB to +18dB @ 45Hz
20k ohms
401S
1200 Watts
100 Watts x 2
200 Watts x 2
400 Watts x 1
2.38" (6.05cm)
9.85" (25.02cm)
11.07" (28.12cm)
40A
ATC
801S
2400 Watts
200 Watts x 2
400 Watts x 2
800 Watts x 1
2.38" (6.05cm)
9.85" (25.02cm)
17.07" (43.36cm)
60A
Not Supplied
AGU

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis