Electrical Installation - Electrolux MO317G Benutzerinformation

14 www.electrolux.com

10.2 Electrical installation

WARNING!
Only a qualified person must
do the electrical installation.
The manufacturer is not
responsible if you do not
follow the safety precautions
from the chapter "Safety
Information".
This microwave is supplied with a main
cable and main plug.
The cable has an earth wire with an
earthing plug. The plug must be plugged
into an outlet that is properly installed
and earthed. In the event of an electrical
short circuit, earthing reduces the risk of
electric shock.
10.3 Installing the microwave
1. Check if the dimensions of the
furniture meet the installation
distances.
A
Installation distances
Dimension
A
B
C
D
2. If the cabinet depth is over 300 mm,
put the template on the bottom of
cabinet and check if it fits. If yes,
C
D
B
mm
380 + 2
560 + 8
300
18
mark the spots for screws. Remove
the template and fix the bracket with
the screws in the marked spot.
Skip this step if the
cabinet depth is 300
mm.
=
3. Install the microwave. If you fixed the
bracket, make sure it locks the back
of the appliance.
4. Open the door and fix the microwave
to the cabinet with screw.
=