ADS Technologies DVDXpressDX2 Handbuch Seite 29

Splash Screen
The splash screen introduces the user to the DTD capabilities. This splash screen can be
disabled so it will not appear again. Click NEXT to Continue.
DTD Wizard Step 1
In Step One you select if you want to capture and burn or load a file to burn, select your
drive and video format you want to capture and burn and verify the drive capabilities and
your optical media.
Capture and Burn or Load a file to burn
The default setting is to capture and burn. If you want to burn a previously captured file,
choose this setting and browse for the file.
Video Compression Settings
Select the video format (VCD, SVCD or DVD). You will be shown the amount of time
available for recording on the disc, based on the disc media and quality settings.
These settings over-ride any capture setting you have previously selected in CapWiz.
However, if you choose "Custom" – the DTD Wizard will use the custom capture settings
you have selected in CapWiz.
Select Disc Drive
If you have more than one Optical drive you can select the drive you want to use for
disc burning.
The DTD Wizard will examine the drive and show the type of media supported by the
drive. This will show the capabilities of your drive. Not all optical drives support burning to
all media types.
25
Downloaded from www.Manualslib.com manuals search engine