ADS Technologies DVDXpressDX2 Handbuch Seite 28

Quick Guide - CapWiz Direct to Disc Wizard
We have tried to make the Direct to Disc Wizard simple to use. You can begin recording
video directly to a disc in as few as 4 Clicks. Here are the quick step by step instructions
to start recording to disc in real time.
1 Insert a Blank CD or DVD disc your disc drive.
2 Click the Direct to Disc Wizard button.
3 Select Capture Direct to Disc or load a file to write to disc.
4 Select the Video format you want to record (VCD, SVCD, DVD)
5 Choose the disc drive you want to use for recording.
6 Check disc status information on the Step 1 screen.
7 Click NEXT.
8 Type in the name of your movie title and video clip
9 Set Duration time or choose "None" for manual control
10 Set Capture point time intervals or "None"
11 Click Record to Disc
12 Click 'Yes' to begin recording after disc has been initialized.
Direct to Disc Wizard
You will notice that we have added a link button on the lower left hand corner of the
CapWiz screen called "Direct to Disc".
Clicking the Direct to Disc button launches the Direct to Disc (DTD) Wizard. The DTD
Wizard can be launched while CapWiz is idle (no video preview) or while video is being
previewed. You cannot start the DTD Wizard while you are recording to the hard drive or if
you are playing back a previously recorded video file.
24
Downloaded from www.Manualslib.com manuals search engine