Philips ZENIA VOX 300 Bedienungsanleitung Seite 8

Using the intercom
This feature allows to make internal calls, activate babysit or transfer external calls from one
handset to the other.The intercom is possible with handsets registered to the same base
station.
Downloaded from www.Manualslib.com
Intercom
(if there are at least 2 handsets)
Internal call or room monitoring activation
1- Go to Intercom, validate
2- If there is only one handset it rings automatically. Otherwise select
from the list the handset/base you want to call and
The called handset/base rings
3- Take the line
The intercom conversation or the baby’s room monitoring can start.
Mute is also available.
Note :You can access the Intercom with the pilot key.
In idle mode
During an external call you can transfer the call to another handset
1- Press
2- Scroll to Intercom, validate
3- If there is only one handset it rings automatically. Otherwise select
from the list the handset/base you want to call
The called handset/base rings.The external call is put on hold.
If there is no answer from the second handset you can resume the
call on the first handset. Use the End Intercom option.
4- Take the line
Both internal callers can talk together.
5- Use the Transfer option.The call is ended on the first handset.
Note : You can also hang up on the first handset with
While the call is put on hold the correspondant hears the music (if
music on hold is activated) or beeps.
Switch (between call 1 & 2) and Mute (microphone) are other
options available in the contextual menu.
To share a conference call
Conference call allows one external call to be shared with 2
handsets (in intercom).The 3 people can share the conversation
(no operator subscription is needed).
Resume from step 1-4 above
5- Select Conference call, validate
manuals search engine
on the called handset/base.
scroll up.
to enter the options
on the other handset/base
Intercom
Call
.
7