Reading The Adsl Access Status; Smart Status; Dmt Bits Allocation - Aethra D2061 Handbuch

Downloaded from www.Manualslib.com manuals search engine
QUICK GUIDE

2. READING THE ADSL ACCESS STATUS

2.1. Smart Status™

The feature allows to display immediately modem, line and instrument status.
In particular the Smart Status™ allows to display:
Number of bits assigned per tone
►
G.826 quality measurement results
►
Count of errors, events, or anomalies on the line.
►
ATM cells statistics
►
Current and history status of any near-end and far-end alarms at
►
ATM level.
Vdc on the line.
►

2.2. DMT Bits Allocation

The Bits graphic/table feature measures the bits per tone distribution used by the
modem to transmit the provisioned rate and displays the number of bits assigned
per tone either in a graphic or table format.
During modem initialisation, a signal to noise measurement is made for each
tone; bit distribution is then optimised to meet the desired bit rate.
Each tone can support a theoretical maximum of 15 bits. During operation, the bit
distribution may be adjusted to optimise bandwidth.
The modems constantly monitor the signal to noise ratio for each tone. If a tone
degrades in quality, a bit swap command can be sent to adjust the amount of bits
assigned to that particular tone.
These bits may be added to a different tone or taken out completely.
D2061 ADSL TESTER
11