Topmark ROBIN Gebrauchsanleitung Seite 12

A. Fold out the chassis
1. Remove product from packaging.
2. At first press the seat height adjust-
ment buttons to raise up the seat in
the highest position.
3. Press both buttons in the circle to
unfold the chair. Release the buttons
and make sure the chair is locked by
hearing an audible click.
EN
B. To install and operate tray
1. Pull out the handle on the bottom of the
tray so the fitting tubes are aligned with the
holes on the armrest insert. Then slide the
fitting tubes into the armrest at the end
position release the handle. Check if the
tray is securely fitted by pulling back the
tray.
2. Tray can be adjusted into two different
positions.
3. The tray can be removed and hanged up
on the buttons located on the rear
ASSEMBLING
tube.
12